1
PowerLED Dimming Control
Reference Manual
ILIM80110
Imtra PowerLED Dimmer
(see page 3)
ILIM80102
Captiva PowerLED Dimmer
(see page 4)
ILIM80200
PowerLED Analog Dimmer
(see page 5)
PWM Control of PowerLED Lights
thru a centralized lighting control
system
(see page 6)
2
Overview
In order to provide control of our PowerLED lighting fixtures to support
various lighting applications, Imtra offers a range of dimming control
solutions.
For typical applications, an ILIM80110 dimmer module may be used with
any number of normally open momentary pushbuttons to control up to 30*
PowerLED lights.
Lighting circuits that include one or more Captiva PowerLEDs require an
ILIM80102. This dimmer module can also be controlled by any number of
normally open momentary pushbuttons and it can control up to 50*
PowerLED lights.
For applications where it is necessary to integrate with a third party
automated control system, one of two solutions may be employed.
1.
A 0-10V analog signal may be used to control the PowerLEDs via
our ILIM80200 dimmer module. This dimmer module requires a 0-
10V analog signal source and can control up to 30* PowerLED
lights.
2.
A Pulse Width Modulating signal may be used to control the
PowerLEDs directly via the white and grey dimming signal wires.
Specifications
ILIM80110 ILIM80102 ILIM80200
Height
0.90” (23mm)
0.84”(21mm)
0.63” (16mm)
Width 3.86”
(98mm)
2.53”(64mm) 2.63”
(67mm)
Depth
2.10” (52mm)
1.47”(37mm)
1.38” (35mm)
Input Voltage Range
10-30VDC
Max. Output Current
0.03A
0.05A
0.03A
Capacity
30 Fixtures*
50 Fixtures*
30 Fixtures*
Control Interface
N.O. Contacts
N.O. Contacts
0-10V Analog
IP Rating
IP40
*Note: Exceeding maximum number of fixtures can permanently damage
dimmer module.
