background image

iC880A QuickStart Guide - QuickStart Guide 

Regulatory Compliance Information 

confidential  

iC880A_QuickStartGuide.docx, Wireless Solutions, V0.6 

page 14 of 15 

 

5

 

Regulatory Compliance Information 

The  use  of  radio  frequencies  is  limited  by  national  regulations.  The  radio  module  has  been 

designed to comply  with the European Union’s  R&TTE (Radio & Telecommunications Terminal 

Equipment) directive 1999/5/EC and can be used free of charge within the European Union. 

Nevertheless, restrictions in terms of maximum allowed RF power or duty cycle may apply.  

The  radio  module  has  been  designed  to  be  embedded  into  other  products  (referred  as  “final 

products”).  According  to  the  R&TTE  directive,  the  declaration  of  compliance  with  essential 

requirements of the R&TTE directive is within the responsibility of the manufacturer of the final 

product.  A  declaration  of  conformity  for  the  radio  module  is  available  from  IMST  GmbH  on 

request. 

The applicable regulation requirements are subject to change. IMST GmbH does not take any 

responsibility for the correctness and accuracy of the aforementioned information. National laws 

and regulations, as well as their interpretation can vary with the country. In case of uncertainty, it 

is  recommended  to  contact  either  IMST’s  accredited  Test  Center  or  to  consult  the  local 

authorities of the relevant countries. 

This Development Kit/Starter Kit does not fall within the scope of the European Union directives 

regarding  electromagnetic  compatibility,  restricted  substances  (RoHS),  recycling  (WEEE),  FCC, 

CE or UL, and therefore may not  meet the  technical requirements of  these directives or other 

related directives. 

 

Summary of Contents for iC880A
















Reviews: