Wireless M-Bus Range Extender /
/
User Manual Version 1.0
Page 8 of 32
1.
2.
3.
4.
5.
Initial Setup
The Wirelesss M-Bus Range Extender requires an initial configuration before usage. This configuration can be done by means of a PC-Tool
called
which is connected via serial interface to the device.
WS Configurator
The configuration includes the following steps:
Setup of LoRaWAN
including activation type for Over The Air Activation (
) or Activation by
protocol parameter
®
OTAA
Personalization (
) and the corrosponding keys and identifiers
ABP
Reset of connected Range Extender
Synchronize the embedded RTC with the local PC time
Setup of calendar events which control the runtime behaviour of this device
Configuration of Wireless M-Bus address parameters for packet filtering
Figure : WS Configurator
It is recommended to perform a reset whenever the LoRaWAN settings have been updated!
®
Do not forget to synchronize the embedded RTC of the Range Extender with the PC time afterwards!
