Thank you for choosing an INSTALLER’S CHOICE
TM
Wall Mount. This product has been specifically designed to mount and
secure flat panel televisions off the wall – providing proper flat panel display viewing angles.
Do not use this product for any purpose not explicitly specified by Installer’s Choice
TM
.
The size and weight of your Flat Panel Display must not exceed the stated weight loads established for each Installer’s Choice
TM
model (see cover page).
Failure to comply with these requirements could result in serious injury or property damage. If you do not understand these
directions, or have doubts about the safety of the installation, contact Installer’s Choice
TM
Customer Service @ 847-391-8100.
Installer’s Choice
TM
is not liable for damage/injury caused by incorrect mounting, assembly, or use.
Supplied Parts and Instructions
Before starting installation, please read ALL instructions carefully. Verify all parts are included and undamaged. If any parts are
missing or damaged, do not return the item to your dealer/installer-contact Installer’s Choice
TM
Customer Service @ 847-391-8100.
Tools Required
Level
Drill
Hammer
Pencil
Socket Wrench
Optional:
Stud Finder
Tape Measure
Screw Driver (Philips)
Installation Hardware
ALL necessary hardware to install your Flat Panel Display mount has been provided from Installer’s Choice
TM
. This includes
mounting hardware for Concrete, Brick, Concrete Block and Wood Stud walls. Please see the hardware packet included in the
internal packaging of this box.
Disclaimer
While Installer’s Choice
TM
/IMS Engineered Products makes reasonable efforts to include accurate and up-to-date information on
its Wall Mount Assembly Instructions, it makes no warranties or representations as to its accuracy. Information in this Instruction
Manual may contain technical inaccuracies or typographical errors and may be changed or updated without notice. IMSEP may
also make improvements and/or changes in the products and/or the programs described at any time without notice. IMSEP
assumes no liability or responsibility for any typographical or other errors or omissions in the content in this installation manual.
Limitation of Liability
Installer’s Choice
TM
disclaims any responsibility for loss of time or use of parts or equipment wherein Installer’s Choice
TM
mounts,
racks, components and accessories are used, transportation of any other incidental or consequential damage; and any implied
warranty of merchantability and fitness for intended use are limited to the duration of this limited warranty. All product warranties
are limited to material and workmanship.
Warranty
This warranty is provided in goodwill and extends only to the original purchaser of the IMS EP Installer’s Choice product – it is non-
transferable. This warranty is automatically void if your Installer’s Choice
TM
product is modified in any way - improperly installed,
extended beyond its stated weight capacity or otherwise misused or abused. This warranty cannot be transferred over or extended
to anyone other than the initial purchaser. The 5 Year Warranty for all mount and related mount products is void if the mount is
moved from its initial installation.
To the absolute maximum extent permitted by applicable law, Installer’s Choice
TM
disclaims any other warranties, express or
implied, including warranties of fitness for a particular purpose and warranties of merchantability. Installer’s Choice
TM
will not be
liable for any damages whatsoever - arising out of the use or inability to use its products, even if Installer’s Choice
TM
has been
advised of the possibility of such damages. To the maximum extent permitted by applicable law, Installer’s Choice
TM
disclaims any
responsibility for incidental or consequential damages.
Please read
INSTALLERS CHOICE
TM
Wall Mount Instructions
BEFORE
Installation
2
WARNING
3260WMIM1.1
Summary of Contents for IC32F
Page 4: ...4 A 1X B C 1X 1X 3260WMIM1 1 ...
Page 8: ...8 G 12 1 2 G 3260WMIM1 1 ...
