background image

Environmental Equipment, Inc. 

IMR 1050X

 

 

www.imrusa.com 

3634 Central Ave. St. Petersburg, Fl 33711 * Phone 727-328-2818 * 800-RING-IMR * Fax 727-328-2826  

 

Email: 

[email protected]

               

Page 20 of 21 

Warranty 

 

IMR® Environmental Equipment, Inc., 3634 Central Ave., St. Petersburg, FL, 33711, USA states the 
following: 
  
IMR®‚ as manufacturer hereby grants the following worldwide IMR® warranty for an IMR® analyzer 
purchased from an authorized dealer.  
1. The IMR® warranty shall entitle every IMR® customer to demand a free replacement or repair of the 
defective parts from any IMR® dealer authorized for the respective IMR® unit.  
 
2. The IMR® warranty shall be granted on the factory new unit and shall commence on the date of the 
delivery of the original IMR® unit to the customer. It shall last for a period of twelve months regardless 
of the type and the intensity of use and regardless of any change of owner, which may occur during this 
warranty period.  
 
3. The IMR® warranty shall refer to absence of faults with respect to the state of the art nature of the 
sold unit in terms of material and finish. The warranty for all parts fitted during the twelve-month 
warranty period shall end with the unit warranty.  
 
4. After the establishment of a material or production fault by IMR® or the authorized IMR® dealer, the 
faults will be eliminated by means of free repair or replacement. Replaced parts shall become the 
property of IMR®. 
 
 5. No warranty claims may be made for maintenance and setting work, cleaning or other utility 
materials required for the function of the unit and other wear parts unless they have a direct bearing on 
work performed under the warranty.  
 
6. The terms and conditions for the acknowledgement of this warranty shall be the presentation of the 
fully completed warranty card, which must contain the confirmation from the authorized IMR® dealer 
on its delivery and, if applicable, the prescribed maintenance work.  
 
7.The IMR® warranty shall only be applicable if  

 

a. The analyzer has been maintained in accordance with the instructions issued by the 
manufacturers and the operating instructions by an authorized IMR® dealer.  
 b. Only original IMR® spare parts have been used for any repairs.  
c. The unit has been used properly, the operating instructions observed and the unit has not 
been used for a purpose other than the one for which it has been designed.  

               d. The IMR® unit has been left in its original design and meets the original IMR® specifications.  

 e. The fault is not due to external influences or use for a purpose other than the one for which it 
has been   designed.  
 f. Exclusively authorized IMR® dealers have made repairs to the IMR® unit. g. The IMR® unit has 
been sent to   an authorized IMR® dealer immediately after the fault was discovered.  

 
8. Warranty time for the analyzer is 12 months, including sensors.

 

 

 

 

Summary of Contents for IMR 1050X






















Reviews: