®
Environmental Equipment, Inc.
IMR EX440 User Manual
3632 Central Ave. St. Petersburg, FL 33711 – Phone: 727-328-2818 / 800-RING-IMR – Fax: 727-328-2826 – E-mail: [email protected] – Web: www.imrusa.com
THE PRIDE OF THE COMPANY – MADE IN THE USA
Page
17
of
21
Press
to change the figures, press
to move the selection. After the last bit is set press
and the value
will be saved. The detector will then enter next alarm setup.
4.7.5
Channel Configuration
Press
to move the selection to
. Then press
to confirm and enter the next interface shown below.
Press
to move the selection. The corresponding channel will start to flash. Press
to select or unselect. A
black dot means the sensor is enabled, and no dot means the sensor is disabled. Continue pressing
to save
all channels’ configuration and exit. After the detector returns to the working interface, the unselected gas
channel(s) will display
only. The enabled gas channel(s) will display readings normally.
4.7.6
Password Modification
Press
to move the selection to
. Then press
to confirm and enter. The screen below will be
displayed.
Press
to change the password. Press
to move the selection. After the last digit is entered press
. The
new password will be saved and the detector will return to working status.
