S t e p 9
Ro u t e T h e We i g h t C a b l e
1)Put the Clip tied on the weight pin leash onto the Top
Plate (#33) as shown below,next connect the Weight
Cable(#46) to the Top Plate(#33).
2)Route the Weight Cable (#46) up and over the two Pu-
lleies (#28), next, secure them to the Main Upright
(#1) using
3)Route the Weight Cable(#46) down and under the two
Pulleies (#24) next, secure them to the Main Upright
(#1) and the Main Support(#2) using
4)Connect the looped end of the Weight Cable (#46) to
the Moving Pulley Block(#11).
two Allen Bolts(#58) M10×45
four Washers(#67)
11× 20×2
two Nylon Locknuts(#71) M10
two Shoulder Bolt(#62) M10×50
two Nylon Locknut(#71) M10
four Pulley Covers(#40)
Φ
Φ
15