Impulse HG5, Owner'S Manual

Page: 12 / 23

─
12
─
Assembly
Step 2
1. Attach the Front support (#8) to the Weight Stack Frame (#1) using:
two M10*60 HHB (#61) two Φ11*Φ20*2 Flat Washers (#68)
two Φ11*Φ38*2 Flat Washers (#67) two M10 Nylon Lock Nuts (#70)
2. Attach the Front Cross support (#9) to the Left Base (#2) &Right Base (#3)
& Front support (#8) using:
four M10*75 HHB (#59) four Φ11*Φ38*2 Flat Washers (#67)
six Φ11*Φ20*2 Flat Washers (#68) four M10 Nylon Lock Nuts (#70)
two M10*25 HHB (#65)
3. Attach the Footboard (#7) to the Left Base (#2) & Right Base (#3) using:
four M10*70 HHB (#60) four Φ11*Φ38*2 Flat Washers (#67)
four Φ11*Φ20*2 Flat Washers (#68) four M10 Nylon Lock Nuts (#70)
Note: Hand tighten bolts and Nylon Lock Nuts until machine is fully assembled.