S t e p 6
Ro u t e T h e C a b l e
12
1)Put the clip tied on the weight pin leash onto the top
plate(#19),next connect the cable 1(#16) To the top
plate(#20)
2)Route the cable1(#16)up and over the two Pulley(#41),
and secure them to the Main Upright(#1),using:
3)Route the cable 1(#16) down and over the two Pulley
(#41), and Secure them to the Main Upright(#1),using:
4)Route the cable 2(#18) over the pulley(#41) ,one side
Secure the Right Arm (#3), the other side Secure the
Left Arm(#4) using:
5)Route the Assistant Cable (#17) Over the big pulley
(#41) and the two lillte pulleys(#42),one Side Secure
the Gimbal(#69),the other side Secure the Cable slide,
using:
Two Allen bolts(#76)M10×45
Two Nylon Locknuts(#84)M10
Four washers(#86)
One shoulder bolt (#79)M10×50
Two 4.5"Pulley Covers(#31)
Two Nylon locknuts(#84)M10
One fowing Pulley Plate (#28)
three pulleys(#41)
Four pulley covers(#31)
three shoulder Bolts(#79)M10×50
Three Nylon clocknuts(#84)M10
Two Screws (#100)M4×20
One big pulley(#41)
two little pulleys(#42)
Two 4.5"pulley covers
four 3.5" pulley covers(#32)
Three shouler Bolts(#79)M10×50
Three Nylon clocknuts(#84)
