6
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power
outlet, and turn on the master power switch on the unit. Only operate heater in upright
position with caster wheels attached.
Insert 2 AAA batteries into the remote control before using (Batteries Not Included)
OPERATING YOUR HEATER
Once the Electric fireplace has been properly connected to an electrical outlet,
make sure the main power switch is turned on. Main switch will light up when
unit is ready to operate:
Power button: Powers the display on and off.
Flame light button: Adjust the brightness of the flame
Heater button: Set up the heater mode and turn off
Timer button:
User setting timing boot or shutdown
℃
/
℉
Button (Button for alternating between Fahrenheit and
Celsius)the heat
Down button
：
For setting temperature or time downward
Up button: For setting temperature or time upward
Remote Control
