Improvements Essential EZ Bed 490209, Instructions

Page: 2 / 3

Instructions for EZ Bed Set-up:
Instructions for EZ Bed Storage:

Unzip storage case
completely before inflation,
make sure panel of storage
case is laid flat on the floor,
this will prevent damage to
bed frame and ensure
smooth extension out of its
storage case.

Clear area, bedding and
any other articles on top or
around EZ Bed prior to
deflation.

Plug pump into a polarized
120V AC outlet.

Turn switch to the “Deflate”
position.

Pump will exhaust
remaining air in your EZ
Bed.

Do not sit anything on top or
around bed during inflation
cycle.

Bed will expand to
approximately 9ft in length
and 7ft in width. (Clear
space accordingly)

Plug pump into a polarized
120V AC outlet.

Turn switch to “Inflate”
position. Airbed will begin to
inflate.

Pump does not turn off
automatically.

When deflation is completed,
turn switch to “Off” position
then unplug from power
outlet and store cord in
“Cord Storage Pocket”.

Airbed-frame will
automatically extend from
its storage case.

Gently lift up Airbed frame
by it’s foot end and push it
back into its storage case.

Pump does not turn off
automatically.

When Airbed reaches
desired firmness, turn
switch to “Off” position.

Unplug and store the cord in
the “Cord Storage Pocket”.

Zip-up storage case for
storage.

EZ
©
Bed is ready for use.

Handle ad wheels are
located on the storage case
for easy and convenient
transport.