Visit www.improvedracing.com for additional support
6
BefOre yOU Begin
WARNING: DO NOT CAP OFF THE OIL COOLER PORTS after the
adapter is installed. Running the engine with the ports capped will block
oil flow and result in catastrophic engine damage. If not using an oil
cooler, the IN/OUT ports must be looped together to prevent engine
damage.
WARNING: NEVER work under a vehicle supported only by a jack.
WARNING: This product should only be installed by a qualified me
-
chanic. Improper installation could result in severe engine damage.
Lubricate O-rings prior to installation to prevent damage and ensure a
leak-free seal.
PreParing fOr installatiOn
1. Open the hood and / or raise the vehicle to access the oil filter.
2. Support the vehicle with automotive-certified jack stands, power lift, or
wheel ramps.
Lift points can be found in the vehicle owners manual.
3. Remove any covers or panels necessary to access the oil filter.
4. Place a drain pan under the oil filter and remove the filter.
Oil may be hot!
5. Secure the oil cooler to the vehicle.
Ensure the oil cooler is isolated from vibration.
Pre-fill the cooler with oil to prevent a dry startup.
6. Plan, measure and assemble the hydraulic fittings and lines.
