XQT300-0-0-GB-06
June 2007
Page 4
Battery Replacement
Figure 4: Battery Position
NOTE:
Figure 4 depicts the Quad Transmitter model XQT903-1-1-GB-XX, Battery
details are the same for the Quad Transmitter model XQT904-1-1-GB-XX.
1.
Remove the Base of the housing, by removing the three retaining screws in the
underside of the Tag.
2.
Push the Battery out of the Battery Holder (see Figure 4).
3.
Insert the replacement Battery, ensuring that the Positive Pole faces AWAY from
the Printed Circuit Board (PCB) as shown in Figure 4.
4.
Re-attach the Base of the housing using the three retaining screws.
5.
Push any of the Push-buttons and check that the Power LED illuminates steady
Red.
NOTE:
If the Power LED does NOT illuminate, check the polarity of the Battery.
Serial Number Label
A Serial Number Label is stuck to the Base of each ImproX Quad Transmitter; keep this
label in a safe place for warranty purposes.
GUARANTEE OR WARRANTY
This product conforms to our Guarantee or Warranty details placed on our Web Site, to
read further please go to www.impro.net.
