1. Determine the desired position of the
shower seat.
Do not discard packaging as it will be
used as a drilling template in step 2.
2. Using the drilling template (printed on
the box), mark the position of all ten
holes onto the wall.
Make sure the
template is at the desired height
above the floor and level.
3. Select an appropriate fixing type for
your wall, and drill the marked holes.
Refer to Fixing Guide for advice on
wall types and fixings.
4. Fix the two arm rest brackets to the
wall. Ensure the hook shape is on the
outside.
5. Place the back rest assembly onto the
arm rest brackets as shown...
6. Hook the arm rest cross-bar into
brackets.
Note: backrest not shown
for illustration purposes.
SlimFold Shower Seat
Installation Guide
Before starting:
This product must be fitted by a
competent person. Additional wall reinforcement may be
necessary, depending on its condition and construction.
7. With the cover removed, secure the
seat assembly to the wall through the
six mounting holes.
Note: Fixings will
pass through the backrest and into
the wall.
8. Once the wall mount and backrest is
securely fixed, clip the cover plate on.
Important:
The bench will be supplied
with the cover plate not fitted.
Do not fit
the cover plate
until the bench is fully
mounted to the wall. Once snapped in place
it will be difficult to remove.
Page 6
