background image

Aqua-Grade Linear

Installation Guide

Issue 2
01/12/15

CONTENTS

Please read and understand this installation guide fully before attempting to install the product.

Always allow new screeds to fully dry before applying the final finish of waterproofing and tiles.
Further guidance can be found in BS 8204 or BS 5385-3:2007

Please follow all installation guides supplied with the Linear drain and waterproofing systems.

Section 1, Components                         

Section 2, Configuration types   

Section 3, Basic assembly rules

Section 4, General Installation guidance

Section 5, Assembly methods

If you require any further information about this product please contact our technical team on: 01460 258 682

SAFETY

Please read these installation instructions carefully before proceeding.

Keep guide for future reference.

Incorrect installation will invalidate the guarantee.

Make sure there are no hidden pipes or cables in the floor or walls where you intend to drill.

Wear safety goggles, shoes and appropriate clothing.

Impey Showers, Conquest Business Park, Ilton, Somerset, TA19 9EA, TEL: 01460 256090  FAX: 01460 259800
[email protected]                                                                                      www.impeyshowers.com

Page 2

Page 3

Page 4

Pages 5-7

Pages 8-12

Summary of Contents for Aqua-Grade Linear













Reviews: