background image

 
 
 
 

TABLE OF CONTENTS 

 

BEFORE YOU BEGIN...................................................................................... 

IMPORTANT SAFETY NOTICES.....................................................................  2 
SMITH MACHINE HARDWARE PACK….......….............................................      3 
SMITH MACHINE ASSEMBLY INSTRUCTIONS.............................................  5 
EXPLODED DIAGRAM…………………………………………………………….. 

18 

SMITH MACHINE PARTS LIST………..…………………………………………..  19 

         

MULTI-PURPOSE BENCH HARDWARE PACK…………………………………     20 

MULTI-PURPOSE BENCH ASSEMBLY INSTRUCTIONS...........................….  21 
EXPLODED DIAGRAM……………………………………………………………...  26 
MULTI-PURPOSE BENCH PARTS LIST………………………………………….  27 
WARRANTY.................................................................................................…. 28 
ORDERING PARTS.......................................................................................…  28

 

 
 

 
 
 
BEFORE YOU BEGIN 

 

Thank you for selecting the PHE9000 by IMPEX FITNESS PRODUCTS.  
For your safety and benefit, read this manual carefully before using the 
machine.   As a manufacturer, we are committed to provide you complete 
customer satisfaction.  If you have any questions, or find there are 
missing or damaged parts, we guarantee you complete satisfaction 
through direct assistance from our factory.  To avoid unnecessary delays, 

please call our TOLL-FREE customer service number.  

Our Customer 

Service Agents will provide immediate assistance to you. 

 

 

 

Toll-Free Customer Service Number       

1-800-999-8899 

Mon. - Fri. 9 a.m. - 5 p.m.  PST 

www.impex-fitness.com 

[email protected]

 

Summary of Contents for Powerhouse Elite PHE 9000






























Reviews: