Impex MCB-5700, Owner'S Manual, Page: 6 / 12

ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended two or more people assembling this
machine to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the Left & Right Upright Beams (#1 & #2) by a Cross Brace (#4) in the mid-
span. Align the holes and secure each end with two M10 x 4 ¾” Carriage Bolts (#33),
one 5 ½” x 1 ¾” Bent Bracket (#13), two
∅
¾” Washers (#42), and two M10 Aircraft
Nuts (#45).
B.) Insert two Crutches (#6) into the top openings on the Upright Beams. Secure them with
two Lock Knobs (#26) through selected holes to obtain desired height of the Supports.
C.) Place the Backrest Adjustment Bar (#5) onto the selected slot on Upright Beams.
D.) Attach the Weight Post (#11) to each Upright Beam. Secure it with one M10 x 1” Allen
Bolt (#36) and
∅
¾” Washer (#42). Attach one Olympic Sleeve (#25) to each Post.
Attach a Spring Clip (#22) to each Sleeve.
5