6
©Impex Inc.
www.marcypro.com
IMPORTANT ASSEMBLY INFORMATION
Tools Required for Assembling the Machine: Two Adjustable Wrenches
and Allen Wrenches.
NOTE: It is strongly recommended that this equipment is assembled by two
or more people to avoid possible injury.
Ensure
Carriage Bolts
are inserted through the
SQUARE
holes
on components
that need to be assembled. Attach washer only to end of the Carriage Bolt.
Use
Allen Bolts or Hex Bolts
inserted through the
ROUND hole
on
components that need to be assembled.
Always wait until all bolts are assembled onto the bench before tightening the
bolts. Do not tighten each bolt right after it is installed
Fasten Nuts and Bolts
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivoting function.
Make sure all pivoting components are able to
move freely.
Do not tighten all Nuts and Bolts in this step.