STEP 4 (See Diagram 4)
A.) Place the Headrest Board (#17) onto the Headrest Bracket (#12). Secure it with two M8
x ¾” Allen Bolts (#43) and
∅
5/8” Washers (#46).
B.) Place the Backrest Board (#18) onto the Backrest Supports (#5). Secure it with four M6
x 1 3/8” Hex Bolts (#39) and
∅
½” Washers (#45).
C.) Place the Seat Pad (#19) onto the Seat Bracket (#9). Secure it with four M8 x 5/8” Allen
Bolts (#40) and
∅
5/8” Washers (#46). Insert a L-shaped Pin (#48) into the selected
hole on the Seat Bracket (#9) to obtain the desired incline of the Seat.
D.) Attach the Arm Curl Pad (#52) to the Arm Curl Stand (#14). Secure it with two M8 x 5/8”
Allen Bolts (#40) and
∅
5/8” Washers (#46). Insert the Stand into the holder behind the
Right Upright Beam. For Arm Curl exercises, remove the Leg Developer and Insert the
Arm Curl Stand into the opening on the Front Stabilizer.
DIAGRAM 4
7
