©
IMPEX INC.
www.impex-fitness.com
7
STEP-2
A.)
Do not tighten Bolts until instructed to do so.
B.) Attach the Rear Support Frame (#40) to Main Frame (#1). Secure them together with six M8 x
⅝” Allen Bolts (#21) and six
Ø 5/8” Flat Washers (#38).
C.) Attach the Rear Stabilizer (#6) to the Rear Support Frame. Secure them together with two M10 x
3” Carriage Bolts (#23), two Ø
⅞” Curved Washers (#24), and two M10 Acorn Nuts (#31).
D.)
Securely tighten all Bolts and Nuts.
E.) Thread the Leverage Knob (#39) to Main Frame from bottom to stabilize the Bike on floor.
