Impex MARCY MWM-8900, Owner'S Manual, Page: 21 / 32

STEP 11 (See Cable Loop Diagram & Diagram 11)
A.) Clip one end of the 76” Butterfly Cable (#37) to the slot on the Left Butterfly Adjustment Frame
(#50). Draw the Cable through the slot then to the open Swivel Pulley Bracket (#49).
B.) Attach a Pulley (#64) to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#95), two
∅
¾”
Washers (#21), and one M10 Aircraft Nut (#18).
C.) Draw the Cable around the Pulley then downward. Install a Pulley to an Angled Floating Pulley
Bracket (#31). Let the Bracket hanging for now.
D.) Draw the Cable upward to the right Swivel Pulley Bracket on the opposite side. Install another
Pulley.
E.) Draw the Cable to the Right Butterfly Adjustment Frame and clip the end of the cable to the
slot.
DIAGRAM 11
20