©IMPEX INC. www.impex-fitness.com
8
OPERATION NOTES
Weight Plate Selection
1. Use the Weight Selector Pin to select the number of weight plates to exercise.
2. Do not insert weight selector pin while the weight stack or top plate is in elevated position.
3. Be certain the weight Selector Pin is completely inserted.
4. Each Weight Plate weights approximately 10lbs.
5. Please
refer to Weight Resistance Chart page
.
6. Never use dumbbells or other means to increase the weight resistance. Use only weight plates
provided by manufacturer.
7.
For safety purpose while the equipment is not in use. Insert the Lock Pin into the hole
on Guide Rod, and use Combination Lock to lock the Pin to prevent the movement of
Weight Plates
. Please refer to the Combination Lock set up.
Cable Tension Adjustment
Adjust the tension of the Cable System by moving the lower Pulley position on the
Double Floating Pulley Brackets.
If the tension is too loose, move up the lower pulley by one hole.
If the tension is too tight, move the lower pulley down by one hole.
.
Lower Pulley
Caution
1.) Always remove Lat Bar and Short Chain after Lat Bar exercises.
2.) Before doing Leg Developer and Low Pulley exercises, ensure to remove Lat
Bar and Short Chain from the Upper Cable to avoid Lat Bar dropping off from
Upper Frame.
3.) When using Low Pulley for Arm Curl and various exercises, ensure both feet
stand on Foot Plate to avoid possible tipping of the machine.
