background image

 

 
 
TABLE OF CONTENTS 

 

BEFORE YOU BEGIN....................................................................................………..  1 
IMPORTANT SAFETY NOTICES...................................................................……….. 2 
HARDWARE PACK……….....….....................................................................……….. 3 
ASSEMBLY INSTRUCTIONS.........................................................................……….. 5 
HOW TO USE..................................................................................................………. 25 
PARTS LIST………………………………………………………………………………….. 26 
RESISTANCE CHART………….......................................................................………. 27 
WARRANTY.................................................................................................…………. 28 
ORDERING PARTS.......................................................................................………… 28

 

 
 

 
 
 
 
BEFORE YOU BEGIN 
 

Thank you for selecting the MARCY MWM 1801 HOME GYM by IMPEX 
FITNESS PRODUCTS. For your safety and benefit, read this manual 
carefully before using the machine. As a manufacturer, we are committed to 
provide you complete customer satisfaction. If you have any questions, or 
find there are missing or damaged parts, we guarantee you complete 
satisfaction through direct assistance from our factory. To avoid 
unnecessary delays, 

please call our TOO-FREE

 

customer service number

Our Customer Service Agents will provide immediate assistance to you. 
 

Toll-Free Customer Service Number 

1-800-999-8899 

Mon. – Fri. 9 a.m. – 5 p.m. PST 

www.impex-fitness.com 

[email protected] 

 

 

Summary of Contents for MARCY MWM 1801






























Reviews: