STEP 5 (See Diagram 5)
A.) Insert one Foam Roll Tube (#10) halfway through the hole on the Leg Developer Holder
(#5). Insert two Foam Roll Tubes (#10) halfway through the holes on the Leg Developer
(#25). Push six Foam Rolls (#38) onto the Tubes from both ends. Plug six Foam Roll
End Caps (#39) into the ends.
B.) Attach two Olympic Sleeves (#50) to the weight posts on the Leg Developer and the
Sliding Weight Holder (#23). Attach two Spring Clips (#30) to the Sleeves.
C.) When doing Leg Developer exercises, remove the Lat Bar Frame (#22) and store it
behind the machine.
DIAGRAM
5
9
