background image

 
 
 

TABLE OF CONTENTS 

 

BEFORE YOU BEGIN................................................................................................ 

IMPORTANT SAFETY NOTICE................................................................................. 

2  

HARDWARE IDENTIFIER.......................................................................................... 

ASSEMBLY INSTRUCTIONS.................................................................................... 

EXPLODED DIAGRAM.............................................................................................. 

PARTS LIST............................................................................................................... 

WARRANTY............................................................................................................... 10 
ORDERING PARTS................................................................................................... 

10

 

 
 
 

 
 
 

BEFORE  YOU  BEGIN 

 

Thank you for selecting the MARCY MWB-544 BENCH by IMPEX INC.  
For your safety and benefit, read this manual carefully before using the 
machine.   As a manufacturer, we are committed to provide you 
complete customer satisfaction.  If you have any questions, or find 
there are missing or damaged parts, we guarantee you complete 
satisfaction through direct assistance from our factory.  To avoid 
unnecessary delays, 

please call our  TOLL-FREE customer service 

number.  

Our Customer Service Agents will provide immediate 

assistance to you. 

 

 
 

 
 
 

Toll-Free Customer Service Number       

1-800-999-8899 

Mon. - Fri.  9 a.m. - 5 p.m.  PST 

www.impex-fitness.com 

[email protected] 

 

Summary of Contents for MARCY MWB-544












Reviews: