6
STEP 2 (See Diagram 2)
A.) Connect the Computer Sensor Wire (#20) from Lower Front Post (#4) to the Computer
Sensor Wire (#20) from Upper Front Post (#5).
B.) Slide the Upper Front Post onto the Lower Front Post. Secure it with four M8 x ¾” Hex
Bolts (#29), four Ø
⅝”
Lock Washers (#39), and four Ø
⅝” Curved Washers (#37
).
C.) Connect the Computer Sensor Wire (#20) from Upper Post to the wire on the Computer
(#18).
D.) Attach the Handle Bar (#6) to the Upper Front Post. Secure it with two M8 x 1 3/8” Allen
Bolt (#27), and two Ø
⅝”
Curved Washers (#37).
E.) Attach the Computer Stand (#14) onto the Handle Bar. Slide the Computer onto the
Computer Stand.
Summary of Contents for MARCY MS-95
Page 8: ...7 EXPLODED DIAGRAM...
