ASSEMBLY INSTRUCTION
NOTE: It is strongly recommended that two or more people assemble this machine to
avoid possible injury.
STEP 1 (See Diagram1)
A.)
Do not tighten Nuts and Bolts until instructed to do so.
B.) Insert the Sliding Frame (#26) into the Main Frame (#1). Thread the Quick Release Knob
(#24) through selected hole on Main Frame into Sliding Frame to lock the Sliding Frame in
position. Thread a M8 Leverage Knob (#20) into the Sliding Frame from bottom.
C.) Attach the Front Stabilizer (#14) to the Main Frame (#1). Secure it with two M8 x 2 ½”
Carriage Bolts (#13), two
∅
7/8” Curved Washers (#9), and two M8 Acorn Nuts (#19).
D.) Attach the Rear Stabilizer (#30) to the Sliding Frame. Secure it with two M8 x 2 ½” Carriage
Bolts (#13), two Ø 7/8” Curved Washers (#9), and two M8 Acorn Nuts (#19).
E.)
Securely tighten all Nuts and Bolts.
F.) Rotate the two Rear Stabilizer End Caps (#29), and adjust the M8 Leverage Knob (#20) on
the floor completely to stabilize the Bike before exercising.
DIAGRAM 1
6
Summary of Contents for MARCY ME-711A
Page 12: ...11 ...
