background image

 

 

IMPEX

®

 INC. 

 

LIMITED WARRANTY 

 

IMPEX Inc. ("IMPEX

®"

) warrants this product to be free from defects in workmanship and 

material, under normal use and service conditions, for a period of  two years on the Frame from 
the date of purchase.   This warranty extends only to the original purchaser.   IMPEX's obligation 
under this Warranty is limited to replacing or repairing, at IMPEX's option. 
 
All returns must be pre-authorized by IMPEX.  Pre-authorization may be obtained by calling 
IMPEX Customer Service Department at 1-800-999-8899. All freights on products returned to 
IMPEX must be prepaid by the customer.  This warranty does not extend to any product or 
damage to a product caused by or attributable to freight damage, abuse, misuse, improper or 
abnormal usage or repairs not provided by an IMPEX authorized service center or for products 
used for commercial or rental purposes.  No other warranty beyond that specifically set forth 
above is authorized by IMPEX. 
 
IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or 
in connection with the use or performance of the product or other damages with respect to any 
economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of 
removal, installation or other consequential damages or whatsoever natures.   Some states do not 
allow the exclusion or limitation of incidental or consequential damages.  Accordingly, the above 
limitation may not apply to you. 
 
The warranty extended hereunder is in lieu of any and all other warranties and any implied 
warranties of merchantability or fitness for a particular purpose is limited in its scope and duration 
to the terms set forth herein.  Some states do not allow limitations on how long an implied 
warranty lasts.   Accordingly, the above limitation may not apply to you. 
 
This warranty gives you specific legal right.   You may also have other rights which vary from state 

to state. 

Register on-line at www.impex-fitness.com

 

 

IMPEX

®

 INC. 

14777 Don Julian 

City of Industry, CA  91746 

 
ORDERING REPLACEMENT PARTS 

 
Replacement parts can be ordered by calling our Customer Service Department toll-free at 

1-800-

999-8899

 during our regular business hours:  Monday through Friday, 9 am until 5 pm Pacific 

standard time. 

[email protected] 

 
When ordering replacement parts, always give the following information. 
 
1. Model 
2. 

Description of Parts 

3. Part 

Number 

4. 

Date of Purchase 

 
 

 

13 

Summary of Contents for Marcy Diamond MD-8861















Reviews: