Impex Marcy Diamond Elite MD-MXM6, Owner'S Manual

Page: 23 / 29

STEP-11 (See Diagram 11)
A.) Insert two ؽ” Bushings (#113) into the holes on the Seat Bracket (#5) and align the
holes to the pivot on the Main Seat Support (#1).
B.) Attach the two Backrest Supports (#10) to the Seat Bracket and align the holes. Secure
them with a M10 x 7 ¼” Allen Bolt (#97), two Ø ¾” Washers (#89), and one M10 Aircraft
Nut (#106). Do not over tighten the Nut and Bolt. Make sure the Backrest Supports are
able to swivel.
C.) Attach the Backrest Incline Support (#7) to the opening on the Main Seat Support (#1).
Use the T-shaped Locked Pin (#15) to secure the Backrest Incline Support at “the last
hole”. See diagram below.
D.) Attach the other end of the Backrest Incline Support to the Backrest Supports (#10).
Align the holes and secure them with two M10 x 1 ¾” Allen Bolts (#93) and Ø ¾”
Washers (#89).
22