Impex MARCY CLASSIC MWM-977, Owner'S Manual

Page: 20 / 27

STEP 8 (See Diagram 8 & Cable Loop Diagram)
A.) Attach one end of the 91” Butterfly Cable (#49) to one Butterfly Cable Bracket (#12). Secure it
with one M10 x ¾” Allen Bolt (#60) and one M10 Aircraft Nut (#65).
B.) Draw the Cable towards the right open Swivel Pulley Bracket (#14).
C.) Attach a Pulley (#42) to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#59), two

¾”
Washers (#65), and one M10 Aircraft Nut (#69).
D.) Draw the Cable over the Pulley then pull downward. Attach the Cable to an Angled Double
Floating Pulley Bracket (#15). Repeat Procedure C to install a Pulley. Let the Bracket hanging
for now.
E.) Draw the Cable around the Pulley and pull upward to the left open Swivel Pulley Bracket.
Install another Pulley as described in Step C above.
F.) Draw the Cable over the Pulley and attach the end to the open Butterfly Cable Bracket. Repeat
Procedure A to secure the Butterfly Cable.
DIAGRAM 8
19