Impex IGS-6500, Owner'S Manual

Page: 6 / 23

FUNCTIONAL TRAINER ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Crossing Wrench and Allen Wrenches.
NOTE: Two or more people assembling this machine is a must. Do NOT attempt to
assemble this machine alone.
STEP 1 (See Diagram 1)
A.) Place the Cross Brace (#4) between the Right & Left Stations (#1 & #2) in the mid-span.
B.) Attach one end of the Cross Brace to the Right Station. Secure it with two M10 x 2 ¾”
Allen Bolts (#62), four Ø ¾” Washers (#58), and two M10 Aircraft Nuts (#76).
C.) Repeat the same procedure to install the other side.
D.) Place the Chin-up Bar (#3) on top of the Right and Left Stations.
E.) Secure each end with two M10 x ¾” Allen Bolts (#67) and Ø ¾” Washers (#58).
5