A.) Place the Cross Brace (#2) in the mid-span of the two Upright Beams (#1).
B.) Secure each end of the Cross Brace with two M8 x 2 ½” Hex Bolts (#20), one Bracket
(#10), two Ø5/8” Washers (#26), and two M8 Aircraft Nuts (#24).
C.) Insert the Backrest Adjustment Bar (#11) through the selected holes for desired incline
position.
DIAGRAM 2
5
STEP 3 (See Diagram 3)
Summary of Contents for COMPETITOR CB-200
Page 4: ...Hardware Pack 3 ...
Page 9: ...8 ...
