©IMPEX INC. www.marcypro.com
IMPORTANT ASSEMBLY INFORMATION
Tools Required for Assembling the Bench: Two Adjustable Wrenches and
Allen Wrenches.
NOTE: It is strongly recommended that this equipment is assembled by two or
more people to avoid possible injury.
Ensure
Carriage Bolts
are inserted through the
SQUARE holes
on components that need
to be assembled. Attach washer only to end of the Carriage Bolt.
Use
Allen Bolts or Hex Bolts
inserted through the
ROUND hole
on components that need
to be assembled.
Always wait until all bolts are assembled onto the bench before tightening the bolts. Do
not tighten each bolt right after it is installed
Fasten Nuts and Bolts
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivoting function.
Make sure all pivoting components are able to move
freely.
Do not tighten all Nuts and Bolts in this step.
CARE AND MAINTENANCE
1. Lubricate moving parts with WD-40 or light oil periodically.
2. Inspect and tighten all parts before using the equipment.
3. The equipment can be cleaned using a damp cloth and mild non-abrasive
detergent. DO NOT use solvents.
4. Examine the equipment regularly for signs of damages or wear.
5. Replace any defective components immediately and/or keep the equipment out of use
until repair.
6. Failure to examine regularly may affect the safety level of the equipment.
7
