Impex APEX TC-1800, Owner'S Manual

Page: 8 / 15

STEP 3 (See Diagram 3)
A.) Attach the Rear Support Frame (#5) to the joint of Left & Right Base Frame (#1 & #2).
Secure them with M10 x 2 ½” Allen Bolts (#24), four Ø ¾” Washers (#32), and two M10
Aircraft Nuts (#36) from the side. Secure them with two M8 x 5/8” Allen Bolts (#28) and
two Ø 5/8” Washers (#33) from top.
B.) Insert the Upper Vertical Frame (#6) into Lower Vertical Frame (#4). Attach the Rear
Support Frame to Lower and Upper Vertical Frame. Secure them together with two M10 x
4” Allen Bolts (#26), one 5 ½” x 1 7/8” Curved Bracket (#13), four Ø ¾” Washers (#32),
and two M10 Aircraft Nuts (#36) from side, two M10 x 2 3/8” Allen Bolts (#25), four Ø ¾”
Washers (#32), and two M10 Aircraft Nuts (#36) from front.
C.) Securely tighten all Nuts and Bolts installed from Step-1 to Step-3.
7