CHEETAH 3G-SDI Camera
November 16, 2017
Page
13
of
53
Rev 1.1
PS12V06 Power Supply Specs:
Cable length:
Supplied AC power input cable (IEC): 1.8m (6’) 100
- 240 VAC, 50 - 60Hz 1A
Power supply output (+12V):
1.5m (5’) ± 15cm (6”)
Electrical:
Over-Voltage Protective Installation
Short-circuit Protective Installation
Protection Type: Auto-Recovery
10 -15 VDC 12VDC nominal, 2 A.
Load regulation ± 5%
Ripple & Noise 1% Max.
Regulatory:
Class 1
Safety standards
UL60950-1, EN60950-1, IEC60950-1
Safety (1) EMC UL/CUL, CE, TUV, DoIR+C-Tick, Semko, CCC, FCC
Safety (2) BSMI, FCC
The PS12V06 power supply (sold separately) terminates in a female Hirose type
miniature locking receptacle #HR10A-10P-12S(73). It has a DB9 connector for
serial RS-232/485 interface and a small BNC pig-tail cable providing external
trigger input (black) and strobe output (white). The following table and figure
show the PS12V06 power supply cabling and connectors.
Pin
Signal
Cable Color
Description
Case
In 1 Return
BNC Black
Tri-level Sync Input 1 Return
Signal
In 1 Active
Tri-level Sync Input 1 Signal
Case
Out 1 Return
BNC White
Strobe 1 Output Return
Signal
Out 1 Active
Strobe 1 Output Signal
Table 3: BNC connector pin mapping.
Figure 3: Power supply and cabling.
PS12V06 Power supply cable descriptions:
1
–
Shielded power supply AC/DC adapter
2
–
Connector, Hirose HR 10A-10P-12S
