Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
84
of
123
Rev 1.0
Acquisition Control
Acquisition Control determines the data flow between the camera and the computer.
Figure 50:
Acquisition control parameters
AcquisitionMode
Supports three modes of acquiring images: SingleFrame,
MultiFrame, and Continuous (refer to the section
for more information on acquisition control).
AcquisitionStart
Starts the acquisition of the device.
AcquisitionStop
Stops the acquisition of the device at the end of the current frame.
AcquisitionAbort
Aborts acquisition immediately, but a partially transferred image
will be completed. If acquisition is not in progress, command is
ignored.
AcquisitionFrameCount
Lets you enter the number of frames to acquire when using the
MultiFrame Acquisition mode.
ExposureMode
Sets the operation mode of the exposure. Options are: Off,
Triggerwidth, Timed (refer to the section
for
more information on exposure modes).
ExposureTime
Sets the exposure time in microseconds when Exposure Mode is
set to Timed and ExposureAuto is Off.
