Cheetah KAC Camera User Manual | Camera Link (CLF) Interface
October 1, 2019
Page
50
of
135
Rev 7.2
Frame “A” WDR E1 (Bright Pixel exposure time)
Address
:
0x0610
Data (19:0)
:
<value> E1 exposure time in micro-sec., 1 sec max
Data (31:20)
:
N/A
Frame “A” WDR E2 (Very-Bright Pixel Exposure time)
Address
:
0x0614
Data (19:0)
:
<value> E2 exposure time in micro-sec., 1 sec max
Data (31:20)
:
N/A
Frame “A” WDR E3 (Ultra-Bright Pixel Exposure time)
Address
:
0x0660
Data (19:0)
:
<value> E3 exposure time in micro-sec., 1 sec max
Data (31:20)
:
N/A
3.2.6 Frame “B” Workspace Registers
3.2.6.1 Frame “B” Exposure Control
This register controls the Frame “B” Exposure Control
Address
:
0x0724
Data (1:0)
:
00 – Off (Free Running)
01 – Trigger Pulse Width (Duration of selected trigger pulse determines exposure time)
10 – Internal (Exposure Control Register sets exposure time in micro-seconds)
11 – Reserved
Data (15:2)
:
N/A
Frame “B” Integration Lines (Line Counter)
Address
:
0x0730
Data (15:0)
:
<value> Exposure time in lines (cannot exceed number of lines
per frame
Frame “B” Integration Clocks (Partial Line Counter)
Address
:
0x734
Data (15:0)
:
<value> Exposure time in pix clks (6.25 nS per tic)
(Cannot exceed the Line Time)
Frame “B” Fixed Frame Period Enable
This register enables the Frame B Fixed Frame Period
Address
:
0x0708
Data (0)
:
0 – disable
1 – enable
Data (31:1)
:
N/A
