Cheetah KAC Camera User Manual | Camera Link (CLF) Interface
October 1, 2019
Page
22
of
135
Rev 7.2
2.3 Mechanical, Optical, Environmental
2.3.1 Mechanical
The camera housing is manufactured using high quality zinc-aluminum alloy and anodized
aluminum. For maximum flexibility, the camera has eight (8) M3X0.5mm mounting
screws, located towards the front and the back. An additional plate with ¼-20 UNC (tripod
mount) and hardware is shipped with each camera. Mechanical drawings for C4080 and
C2880 Camera Link output cameras are found in Figures 1.7a to 1.7b below. All
dimensions are in millimeters.
2.3.1.1 C4080 Camera Link Mechanical Drawings –
Figure 13: C4080 side view.
Figure 14: C4080 side view with image plane.
