Cheetah Pregius Camera with Camera Link
–
User Manual
July 6, 2018
Page
13
of
64
Rev 1.1
2 Hardware
2.1 Camera Connectivity
The back panel of the camera provides all the connectors needed to operate and control
the camera. The back panel also provides an LED status indicator.
Figure 1: CLF camera back panel connectors.
The camera provides the following connectors:
1.
Two camera outputs. These are standard Mini-Camera Link connectors providing
data, sync, control, and serial interface.
2.
Male 12-pin Hirose miniature locking receptacle #HR10A-10R-12PB (71)
providing power and I/O interface.
3.
Status LED indicating the status of the camera (2.1.2. Camera LED Status).
4.
Model / Serial Number showing the camera model and serial number.
2.1.1 Pin Assignments
The Hirose connector on the camera’s back panel is a male type miniature locking
receptacle #HR10A-10R-12PB(71). The Imperx power supply (sold separately) terminates in
a female HIROSE type miniature locking receptacle #HR10A-10P-12S(73) and has two small
BNC pig-tail cables for the external trigger input (black) and strobe output (white) (Table 1).
Figure 2: Connector Pin-outs.
Status LED
Camera Link
Full connector
12-pin connector
for power, I/O
Camera Link
Base connector
