Imperial STREAMY 1, User Manual

Page: 39 / 56

E
38
39
IMPERIAL STREAMY 1
1.Status LED
The following status messages can be displayed:
Permanent red: device can be connected to a Wifi network
Permanent blue: device is probably connected with a Wifi network
and is ready to receive audio signals.
Flashing red: device is unable to connect to a Wifi network
Flashing blue: Booting procedure (about 3 seconds) or firmware
upgrade (about 2 minutes)
2. MINI USB jack for USB mains adapter
Please connect the mains adapter, included in delivery content, with
this Mini uSB jack. It is also possible, to operate the STREAMY 1 with
a PC or Laptop by using a cable Mini uSB- uSB which is not included
in delivery content.
3. Optical TOSLINK (S/PIDF) output
Via this output you can connect any audio device equipped with an
optical S/PIDF input by using the optical Toslink cable, included in
delivery content.
4. LINE OUT analogue stereo output
On this output you can connect any audio device equipped with an ana-
logue audio input, by using one of the analogue stereo cables included
in delivery content.
5. RESET
Press this reset button any hold it pressed for about 5 seconds in
order to reset the device.
5. ILLuSTRATIONS AND DESCRIPTIONS
bda_Streamy 1_11_15.indd 39 19.11.15 14:34