E
E
48
D
D
9.1 Operation
9.1.1 Automatic station scan
To perform a station scan proceed as follows:
While in FM mode, press the Scan key (see Fig. 4.1). The FM scan will
start with the highest FM frequency (108 MHz) and will run backward.
The scan will stop automatically at the first FM station received.
Press the Scan key again to continue the scan. Continue tin this manner
until you receive the desired FM station.
9.1.2 Manual station scan and fine tuning
You can also scan for stations manually. Proceed as follows:
While in FM mode, scan for stations using the ◄► keys. Use the ◄ key to scan the
bandwidth downward, use the ► key to scan the available frequencies upward.
To do this, keep the ◄ key resp. the ►key pressed down, the scan will begin and
will stop as soon as a radio station is received.
Briefly press the ◄► keys to additionally fine-tune the stations being received.
Press the appropriate key to move up (►) or down (◄) in stages of 0.05 MHz
9.1.3 Station memory
In FM mode the IMPERIAL DABMAN 100 features a favourites memory for
10 radio stations. To save a station, you must first perform a station scan as
described under 8.1.1 resp. 8.1.2.
9. OPERATION
