Thank you for purchasing this Horus product.
These instructions relate to our basins and pedestals.
Before you start check you have the necessary tools for installation.
Before you begin: Always handle our products with care and attention.
Ceramic products are brittle, and
may chip, crack or break if not handled carefully. Broken ceramic is extremely sharp.
Take care not to over tighten screws and fittings. Over tightening may lead to breaks
or chips in the ceramic.
These instructions are for installing the basin on a solid wall only. For other installations
including wall bracing please contact us directly for further guidance.
Before installing the product, please inspect for damage incurred during transport.
Imperial can not take responsibility for damaged products after or during their installation.
We recommend that the guidance of a qualified plumber is sought throughout the
installation process.
Always observe the plumbing and building regulations in the area the product is being
installed in.
Horus reserves the right to amend the design of its products without notice, as
specified in the company catalogue.
Tools and Fittings:
The following tools are neccessary for the installation of this product.
Horus would once again recommend that a qualified plumber carry out the installation
of this product.
Set Square Tape Measure Goggles Spanner Pliers
Basin Bolts
*
Pencil Drill Spirit Level Pipe Spanner Socket Spanner
w/sockets
*Whilst some of our basins use basin bolts to hold them in place, some are fixed by brackets.
Please check the back of this installation to see which mounting is suitable for your product
before continuing. If your basin requires a bracket fixing, please turn to the back page
of this booklet.
Installation Guide
Pedestal and Semi-Pedestal Guidelines
Summary of Contents for Bracket Mounted Basin
Page 6: ...Measurements Drawings...
Page 7: ...Measurements Drawings...
