Imperial BAS 6, Operation Manual

Page: 29 / 100

29
IMPERIAL BAS 6
E
4. IMAGES
1. Microphone
Microphone for hands-free function
2. On/Off button
Press the button for 2 seconds to switch the device on or off. Briefly
press this button to switch between the individual operating modes
3. Indicator LED
Indicates different operating states.
Flashes blue: device in Bluetooth pairing mode. Searching for a Blue
tooth connection
Lights blue: Bluetooth connection successfully established.
Lights green: device is being charged via USB port or via solar panel.
The green LED goes out when the speaker is fully charged.
Flashes red: battery is almost empty. Device must be charged.
4. Hands-Free Function
Briefly press this button to accept an incoming telephone call if the
speaker is connected to a mobile telephone or smartphone via
Bluetooth.
5. Previous Track
Briefly press the button to select the previous track when playing
back a file via the SD card or Bluetooth device.
6. Play/Pause
Briefly press this button to pause or resume music playback.
7. Next Track
Briefly press the button to select the next track when playing back
a file via the SD card or Bluetooth device.
8. Decreasing the Volume
Hold the button down to decrease the volume.
9. Increasing the Volume
Hold the button down to increase the volume.
10. SOLAR PANEL
Solar panel for independent power supply.
When daylight is sufficient, the battery of the speaker can be charged
via the solar panel.
11 12 13 14
11. USB Connection / Power Bank Function
Connect a USB charger cable here to charge your smartphone,
tablet, or other USB device via the speaker.
12. Micro USB Port
Connect the cable included in the delivery scope via this connector to
charge the radio via a USB power source. Via the USB port, you can
also access the data of the inserted SD card.
13. AUX IN 3.5 mm
Connect an external audio source here, such as an MP3 player, smart
phone, or tablet, with the 3.5 mm AUX jack cable.
14. Micro SD Card Slot.
Insert a Micro SD card here to play music from it.
Charging the Device
Before initial operation, we recommend charging the device for approx. 2
hours.
Connect the device with the USB charger cable included in the delivery
scope to a USB power supply, e.g., to a PC, to a USB charger, or to a note-
book.
Once the power supply is established, the charging process will start.
4. IMAGES
BDA_BAS_6_01_19.indd 29 15.02.19 12:51