Imperial Cal Products, Inc.
Wall Mount Installation Detail:
MODELS:
MODELS:
MODELS:
WHP1900PS1
WHP1900PS
WHP1900PS1-TW
WH1900PS1
WH1900PS
WH1900PS1-TW
WH1900PS1R
WH1900PSR
WH1900PS1TWR
WH1900PSB
*(Baffle Filters)
WH1900PS1-TWB
*(Baffle Filters)
CAUTION: Be sure that incoming power is turned off.
1. Position the Wall Canopy on it’s back and remove the filters.
2. Remove the Powered Liner (C2000) assembly from the canopy shell by unscrewing the Four (4)
mounting nuts with washers located at each corner of the insert.
3. Install canopy shell to the wall by securing it to a minimum of two (2) structural wall studs. Caution;
Pre-Punched installation key holes in the rear of the canopy to be used only if they line up with the
exiting wall studs. If needed, drill additional mounting holes and secure to existing wall studs or
remove the dry wall and install proper backing to match pre-punched mounting holes.
Note: In the case of the “Rear Vented” series use the two vertical support pieces on the back side to
temporarily attach the canopy to the wall. Locate the wall studs and using the four small (4) metal
mounting brackets secure the canopy to the wall.
4"
24"
3/4"
10-3/4"
6-1/2"
1/2"
11-3/4"
18"
30
",
36
" &
4
2"
=
4
-1
/2
"
48
",
54
" o
r 6
0"
=
7
-1
/2
"
9-1/8"
2-1/2"
30", 36", 42", 48", 54" or 60"
Note: Check series specifications for size availability.
All sizes not available in all model series.
Front
Back
30
" =
1
4-
11
/1
6"
36
" =
2
0-
11
/1
6"
42
" &
4
8"
=
2
6-
11
/1
6"
54
" =
3
2-
11
/1
6"
60
" =
3
8-
11
/1
6"
1-
1/
2"
9-1
/8"
1-3
/4"
To
p
Bo
tto
m
7/
8"
9-1
/2"
10
-7
/8
"
10
-7
/8
"
21
-3
/4
"
WH1900PSR
WH1900PS1R
WH1900PS1-TWR
Note: Booster or baffle options not
available on Rear Vented units.
