2
SAFETY WARNINGS
This product is designed only for specific applications as defined in the instructions and should not be modified or
used for any manner not described in these instructions. Use only recommended accessories. Before using the EVOK
150 Horizontal Wall Bed Kit:
READ, UNDERSTAND
and
FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS. KEEP
THESE INSTRUCTIONS READILY AVAILABLE FOR FUTURE REFERENCE.
PRODUCT SPECIFIC WARNINGS
I. TO AVOID THE RISK OF SERIOUS INJURY, DO NOT ALLOW
CHILDREN TO PLAY ON THE BED UNIT OR OPERATE IT WITHOUT
ADULT SUPERVISION.
II. You
MUST
have another
ADULT
help you while installing your
EVOK 150 Horizontal Wall Bed Kit to make sure the bed does not
close inadvertently while you are working. Failure to do so increases
the risk of serious injury.
III. You
MUST
install
ALL
of the 1/4” x 3” Washer Head Lag Bolts
into 2 x 4 or larger wooden wall studs. Failure to secure the unit into
wooden wall studs increases the chance that the bed cabinet will
detach and tip over, potentially resulting in serious injury.
IV. Cabinets for horizontal Single and horizontal Double beds
MUST
be secured, using all required hardware, to at least two (2)
wall studs; cabinets for horizontal Queen beds
MUST
be secured to
at least three (3) wood wall studs.
V. Wall Bracket (P) and lag bolt placement on images in these
instructions is for illustration purposes only. To avoid the risk of
serious injury, you must correctly place and securely attach Wall
Brackets and lag bolts to wooden studs in your wall.
VI. Do
NO
T use wall anchors or drywall anchors.
VII. Do
NOT
install against brick or masonry walls or walls with metal
studs.
VIII. The bed will not stay down without the weight of
the mattress and panels. Operating the bed mechanism
without a mattress in place risks sudden closing,
entrapment and serious personal injury.
IX. Do
NOT
use an impact driver to drive fasteners; the
added torque increases the risk of stripping the pilot
hole and weakening connections. Do
NOT
overtighten
screws.
X. Do
NOT
stand on the bed without an adult helper
holding it down to prevent it from lifting up.
XI. Do
NOT
deviate from the required interior cabinet
opening dimensions listed for the bed size you will be
building. An improperly sized bed cabinet could create
a safety hazard and result in serious personal injury.
XII. Do
NOT
modify the recommended design of
the bed cabinet to eliminate an Upper and/or Lower
Headboard. Such modifications could allow it to more
easily detach from the wall, causing serious injury.
XIII. Do
NOT
construct the cabinet from MDF,
particleboard or melamine coated MDF particleboard.
The decreased screw-holding ability of these materials
increases the risk of cabinet joint failure and serious
personal injury.
XIV. Do
NOT
use a foam or very light mattress with this
product. See required weight specifications below.
Max. Mattress Size
Max. Mattress Thickness & Weight
39 x 75" (991 x 1905mm)
10" (254 mm) 66 lbs (30 kg)
54 x 75" (1372 x 1905mm)
10" (254 mm) 99 lbs (45 kg)
60 x 80" (1524 x 2032mm)
10" (254 mm) 132 lbs (60 kg)
Bed Size
SINGLE
DOUBLE
QUEEN
*Check on last page for Dynamic and Static load rating
