1
FeATUReS AT A GlANCe:
• Multi-Operating modes: AUTO, COOL, DRY, HEAT (select models only), and FAN
• Timer settings for 24 hours
• Indoor Temperature Range Settings from 62° to 88°F (17°C to 30°C)
• Sharp Liquid Crystal Display (LCD) Unit
• Backlit display
HANdlING THe ReMOTe CONTROl
Use the remote controller within a distance of 8 meters from the appliance,
pointing it towards the receiver . Reception is confirmed by a beep .
CAUTION
• The air conditioner will not operate if curtains, doors or other materials block
the signals from the remote controller to the indoor unit .
• Prevent any liquid from falling into the remote controller . Do not expose the
remote controller to direct sunlight or heat .
• If the infrared signal receiver on the indoor unit is exposed to direct sunlight,
the air conditioner may not function properly . Use curtains to prevent the sun-
light from falling on the receiver .
• If other electrical appliances react to the remote controller . either move these appliances or consult your
local dealer .
ReplACING THe BATTeRIeS
The remote controller is powed by two dry batteries (R03/LR03X2) housed
in the rear part and protected by a cover .
Step 1: Remove the cover by pressing and sliding off .
Step 2: Remove the old batteries and insert the new batteries, placing the
(+) and (-) ends correctly .
Step 3: Reattach the cover by sliding it back into position .
NOTE: When the batteries are removed, the remote controller erases all
programming . After inserting new batteries, the remote controller must
be reprogrammed .
SAve TIMe ANd MONey!
If you review this manual carefully, you may not need to call for service at all .
NOTe: All drawings in this manual are
for illustrative purposes only . The actual
shape and functions of your remote may
vary slightly . Optional features on some
remotes are designated by an asterisk (*) .