Impecca OM-1600K, User Manual

Page: 7 / 61

7
ENGLISH
FRANÇAIS
ESP
AÑOL
INSTALLING YOUR MICROWAVE OVEN
INSTALLATION PROCEDURE
1. Before installation and operation:
• Remove all packing materials and accessories. Ensure there are no packing materials
inside the microwave.
• Examine the oven for any damage such as dents or a broken door. If the unit is damaged,
do not install it! Contact technical support or the place of purchase.
• Remove any protective film found in or on the microwave oven.
Warning:
Do not remove the light brown Mica cover that is attached inside the oven
cavity. This protects the magnetron.
2. Select a level and stable surface that provides enough open space for the intake and/or
outlet vents. Blocking the intake and/or outlet openings can damage the oven. Do not place
the oven where heat, moisture, or
high humidity are generated.
• A minimum clearance of 3
inches (7.5cm) is required
between the oven and any
adjacent walls. One side must
be open for proper ventilation
and heat dispersal.
• Leave a minimum clearance
of 12 inches (30cm) above the
oven.
• Place the oven as far away from radios and TVs as possible.
• The surface should be more than stable enough to support the microwave itself along with
any food that will be placed inside of it.
3. Plug your oven into a standard household outlet. Be sure the voltage and the frequency is
the same as the voltage and frequency on the rating label.
• Be sure that the power supply cord is undamaged and does not run
under
the microwave
oven or over any hot or sharp surfaces.
• The socket must be readily accessible so that it can be easily unplugged in an emergency.
TURNTABLE INSTALLATION
Your microwave should come with the roller ring already installed. The glass tray must rest
perfectly centered on top of the wheels of the spindle to operate properly. Do not operate the
oven without glass tray and roller ring in their proper positions.
3” (7.5cm)
3” (7.5cm)
12“ (30cm)