TROUBLESHOOTING TIPS
TROUBLE SHOOTING
1. Unit does not
Start
when
Pressing on/off
Button
- P1 appears in the display window
Drain the water in the bottom tray.
TROUBLES
POSSIBLE CAUSES
SUGGEST REMEDIES
Reset the temperature.
Make sure all the windows and
doors are closed.
Remove the heat sources if possible.
Connect the duct and make
sure it can function properly.
Decrease the set temperature.
Clean the air filter.
- Room temperature is lower than
the set temperature.(Cooling mode)
- The windows or doors in the room
are not closed.
- There are heat sources inside the
room.
- Exhaust air duct is not connected or
blocked.
- Temperature setting is too high.
- Air filter is blocked by dust.
2. Not cool enough
Place the unit on a flat, level
ground if possible.
It is normal.
- The ground is not level or not flat
enough.
- The sound comes from the flowing
of the refrigerant inside the
air-conditioner.
4. Noisy or vibration
5. Gurgling sound
1
4
Technical support
For questions not answered in this manual, or for warranty service, please contact
Impecca Technical Support:
By phone: 1-866-954-4440 (9:00 AM to 6:00 PM Eastern Time)
By e-mail: [email protected]
Online: www.impecca.com
© 2015 Impecca
