- 13 -
SETTINGS
1. Press the
SETUP
button. The setting menu will appear on the screen.
2. Use the
Direction
buttons to select and highlight the function you need to configure. Press the
Direction
button. Press the
ENTER
button to confirm the selection.
3. Press the
SETUP
button to save the settings and exit.
General Setup Page
This page allows you to configure the TV Screen format, Angle Mark, OSD, Captions, HDCD, and
Last Memory settings.
TV Display
If
TV Display
is selected, press the
Direction
button to enter. Press the
Direction
buttons
to select
4:3
or
16:9
to match the aspect ratio of your TV then press the
Enter
button to
confirm your selection. Press the
SETUP
button to save the setting and exit.
4:3 : Select when the unit is connected to an external 4:3 TV.
16:9: Select when the unit is connected to an
external wide-screen TV.
Angle Mark
You can enable or disable the ability to select different camera angles when viewing DVDs that
offer this feature.
OSD Lang (On screen display language)
You can select your desired OSD language from this menu.
Captions
You can use this feature to display recorded explanatory captions.
Screen Saver
When the unit is in Stop mode for several moments, a screen saver will display if this feature is
enabled.
HDCD
You can use this feature to enable playback of High Definition compatible digital CDs
Last Memory
This feature will enable the DVD player to resume playback from the last point played before
the player was turned off.