11
OPERATING INSTRUCTIONS
/VERLOAD 0ROTECTION &IG
5NDER NORMAL WORKING CONDITIONS THE 'REEN
OUTPUT INDICATOR LIGHT WILL BE ILLUMINATED
)F THE GENERATOR IS OVERLOADED OR IF THERE IS A
MALFUNCTION OR A SHORT CIRCUIT IN A CONNECTED
APPLIANCE THE 'REEN OUTPUT INDICATOR WILL
EXTINGUISH AND THE 2ED OVERLOAD INDICATOR LIGHT
ILLUMINATES AND THE POWER TO THE CONNECTED
APPLIANCE WILL BE DISCONNECTED
)F THE 2ED OVERLOAD INDICATOR LIGHT ILLUMINATES
STOP THE GENERATOR AND INVESTIGATE THE CAUSE
"EFORE CONNECTING AN APPLIANCE TO THE
GENERATOR CHECK THAT IT IS IN GOOD ORDER AND THAT
ITS ELECTRICAL RATING DOES NOT EXCEED THAT OF THE
GENERATOR 4HEN CONNECT THE POWER CORD OF THE
APPLIANCE AND START THE ENGINE
7HEN AN ELECTRIC MOTOR IS STARTED BOTH THE
2ED OVERLOAD INDICATOR AND THE 'REEN OUTPUT
INDICATOR WILL ILLUMINATE SIMULTANEOUSLY 4HIS IS
NORMAL THE 2ED OVER LOAD INDICATOR
EXTINGUISHES AFTER ABOUT FOUR SECONDS )F THE
2ED OVERLOAD INDICATOR REMAINS ILLUMINATED
CONSULT YOUR GENERATOR DEALER
#AUTION 3UBSTANTIAL OVERLOADING THAT
CONTINUOUSLY ILLUMINATES THE 2ED OVERLOAD
INDICATOR MAY DAMAGE THE GENERATOR )F THE 2ED
OVERLOAD INDICATOR LIGHT AND THE 'REEN OUTPUT
INDICATOR ILLUMINATE AT THE SAME TIME WHEN
ENGINE STARTS AND THE 2ED OVERLOAD INDICATOR
REMAINS ILLUMINATED AFTER THE 'REEN OUTPUT
INDICATOR EXTINGUISHES PLEASE CONTACT YOUR
SUPPLIER
.OTE &OR EQUIPMENT WITH AN INDUCTIVE LOAD
MORE POWER WILL BE REQUIRED AT INITIAL START
5NDER THESE CONDITIONS IT IS NORMAL FOR BOTH THE
2ED OVERLOAD INDICATOR AND THE 'REEN OUTPUT
INDICATOR WILL ILLUMINATE SIMULTANEOUSLY FOR A
SHORT PERIOD ABOUT FOUR SECONDS !FTER THE
APPLIANCE STARTS THE 2ED OVERLOAD INDICATOR
EXTINGUISHES AND THE 'REEN OUTPUT INDICATOR
WILL REMAIN ILLUMINATED
4HE CIRCUIT BREAKER FOR THE 6 $# CHARGING
FUNCTION IS POSITIONED NEXT TO THE 6 SOCKET
&IG
&IG
&IG
&IG
&IG
34/0